Standard settings for this PC
|
<< Click to Display Table of Contents >> Navigation: Dialogs and Views > File configuration dialogs > Standard settings for this PC |
These pages allow you to change settings that determine the behavior of Condes and the Course Layout Editor, and which are not specific to a given event. This section has the following pages:
•Map
This page allows you to change settings that determine the behavior of the Condes application.
Auto update
Check for program updates upon launching Condes
When this option is checked, on startup Condes starts the auto-updater program, which checks if a newer version of Condes is available.
Language
Language for symbols
This is the language used for the description symbols. The titles are used when printing textual control descriptions and as guiding texts when editing control descriptions.
The following languages are available: Bulgarian, Chinese, Danish, English, Australian English, Finnish, French, German, Italian, Norwegian, Spanish, Swedish, Turkish and Ukrainian.
The default option is <Windows default>. When this option is selected, the language, which is set in Windows' control panel, applies.
Language for menus
This is the language used for menus and dialog texts. The following languages are available: Bulgarian, Chinese, Danish, English, French, Finnish, German, Spanish, Swedish, Turkish and Ukrainian.
The default option is <Windows default>. When this option is selected, the language, which is set in Windows' control panel, applies.
Application look
This controls the visual style Condes uses for its windows, toolbars, and menus. Select the look you prefer from the list; the new look is applied when you close this dialog with OK.
Default Coordinate Reference System (CRS)
When the map file for an event is a georeferenced bitmap file or an OCAD 8 file, you need to configure a Coordinate Reference System that corresponds to the location of the map, as this information is not available in the map file. As the CRS usually is the same for all maps in a given area, it is convenient to save this as a default value.
See Georeferenced maps for more explanation about this.
If using a UTM/WGS84 based map, you enter a UTM Zone; if not, you enter an EPSG code.
Printers
Remember printer settings
When this option is checked, Condes remembers which printer it is set up to use, and the settings for that particular printer.
PostScript printers
Use PostScript pass-through
When printing on a PostScript printer, and this option is checked, Condes generates the PostScript code for the map file and passes it directly to the printer.
Normally, printing is done with help from a Windows printer driver. However, such a printer driver requires all colors to be specified as RGB colors.
As PostScript does support CMYK colors, bypassing the Windows printer driver allows Condes to send the map file's native CMYK colors directly as PostScript to the printer.
One drawback is that PostScript does NOT support transparency, so transparent colors will appear as solid colors when printing. If transparency is important, uncheck this box.
This page allows you to change standard settings that determine the behaviour of the Course Layout Editor.
When you create a new event file
Automatically draw a layout frame
A layout frame can be used to draw a frame around the layout. When this option is checked, the Course Layout Editor automatically enables the layout frame when you create a new event file. Uncheck this option if you do not want Condes to automatically enable the frame.
This option ONLY controls what happens when a new event file is created. You can still control the settings for the layout frame by double clicking on the edge/frame at any time. So, if you want to enable/disable the frame at a later stage, just double-click on the layout frame.
When you create a new course
Automatically create a text on the map with the course name
When you create a new course, Condes automatically places a text with the course name on the map.
Uncheck this option to disable this feature.
Automatically create a control description frame on the map
When you create a new course, Condes automatically places a control description on the map, if there isn't already a "for all courses" control description on the map.
Uncheck this option to disable this feature.
When Condes starts up
Open previous event at Condes start-up
When this option is checked, on startup Condes opens the event file that was opened the last time you closed Condes.
Auto-save backup-version of open files
Auto-save interval
This is the interval (in minutes) at which Condes saves your work in a backup copy of the file, which can be retrieved in case Condes restarts.
When the map file is updated
Automatic update when the map file changes
When this option is checked, Condes updates the map image whenever the map file changes, for example if you edit the OCAD map outside of Condes, while you keep Condes open.
Symbol palette
Symbol palette box width
This value controls the size of the symbol boxes in the symbol palette.
Changing the box size can be useful to better adjust the palette to your screen resolution. Depending on the screen resolution, the symbols may look better when shown at a slightly different size than the default.
Status bar
Show longitude/latitude in status bar (when available)
Use this option to control how world coordinates for the mouse cursor are shown in the status bar.
When this option is checked, Condes displays longitude/latitude. When this option is unchecked, Condes displays the "raw" metric distance world coordinates. World coordinates are available only when the map is georeferenced.
Default folder for event files
This is the location in the directory tree where Condes saves event files (.wcd). When saving an event file, you can specify a different location.
Default folder for map files
This is the location in the directory tree where Condes looks for map files. When opening a map file, you can specify a different location.
This section allows you to change settings related to the printout of listings and reports. These settings DO NOT apply to printing of maps and courses.
Left, Right, Top, Bottom
Margins measured in millimeters.
Report fonts
The fonts used for reports, such as "Controls Spreadsheet"
Body text
The font used for the body text.
Page header
The font used for the page header.
Control descriptions symbols
Condes has a built-in set of control descriptions symbols. This set contains all of the symbols in the current IOF Control Descriptions specification.
You can modify symbols, add symbols, and modify the name of the symbols. To do that, you first need to create a file on the disk to hold your own symbols set.
This dialog has three buttons to control the symbol file:
1.Use Condes built-in symbols
Select this option to revert to using Condes built-in symbol.
2.Use my own symbol file -- Copy Condes built-in symbols ...
Use this option to start from the built-in set. Condes copies the built-in set to a file.
3.Use my own symbol file -- select existing file ...
Use this option if you already have an existing symbol file on your disk, which you want to use.
To modify a symbol name or symbol graphics, first make sure to "use my own symbol file"; then close any open Condes event file, and use the Symbols menu to modify symbols.
This page has settings related to a club's standard set of control stands and pin punches.
You can configure which control code Condes uses as the first code when you create a new control in an event file. You can also configure a standard set of predefined control codes, for example those belonging to an orienteering club's standard set of control stands. You can also configure the pin punch patterns for these controls.
When creating a new control
First control code
This is the lowest number that Condes suggests as a control code for a new control.
When creating a new control, use codes from this set of codes
When creating a new control, Condes uses an unused control code from the set configured on this page.
Standard set of control stands (codes)
The standard control codes and pin punch patterns is stored in a file on your PC.
The standard file name for the punches file is "Condes standard punches.DAT". The standard location for the file is the folder for Condes event files, which you configure in the Folder Settings dialog.
Saved in this file
You can set the name of the punch file that Condes uses'
Set of codes and punch patterns
Here you can add, delete, modify, and print the punches in the predefined set.
Note that the file remains on your PC, and the predefined codes and punch patterns are not copied to the event file. If you copy (or e-mail) the event file to another PC, the predefined punch patterns remain on your PC. You need to copy the file to the other PC for Condes to use these punches on that PC.
For more on this topic, consult "How to use a standard set of control stands (and punches) for more events"