Georeferenced maps

<< Click to Display Table of Contents >>

Navigation:  How to (maps) ... >

Georeferenced maps

Many maps are georeferenced, and this makes it possible to determine World Coordinates as well as Longitude and Latitude for the controls and other objects that can be placed on the map.  Determining longitude and latitude for controls is very useful when exchanging data with GPS based applications, such as for example route choice apps.

Condes supports georeferenced maps and automatically reads georeferencing data from the map file if such data is present:

OCAD map files can contain georeferencing data, which Condes can use right away.   If the OCAD map file has configured a Coordinate Reference System (CRS), then Condes can translate the map's coordinates to longitude and latitude.  From OCAD 9 and newer, the reference coordinate system can be configured directly in OCAD.  For OCAD 8, the map can be geo-referenced, but the file does not contain information about the reference coordinate system, so Condes uses the reference coordinate system configured in Application Settings. OCAD 7 and older does not contain georeferencing information.

 

Using georeferenced bitmap maps

Bitmap files (e.g. JPG, TIFF) can carry georeferencing information in one of two ways: via an accompanying World File, or via a GeoTIFF's embedded georeferencing data. Condes reads this information to position the map correctly.

Bitmap + World File

A bitmap file can be accompanied by a so-called "World File", which contains the real-world coordinates for the top left corner of the bitmap. A World File has the same file name as the bitmap file, but a different extension - for example, the World File associated with "MapFile.jpg" is "MapFile.jpw".

Condes reads the coordinates in a World File to position the map correctly. However, a World File does not contain information about a coordinate reference system (CRS), so you need to enter this info directly into Condes. If the map is in UTM/WGS84 - the most common case - you enter a "UTM zone"; search for "UTM Zone" on the internet if you're unsure which one applies. If the map uses a different CRS, you instead enter its EPSG code - a short numeric identifier (e.g. "25832"). A number of web sites can help you look up the right EPSG code for a given map. If Condes finds a World File, it asks you to enter the UTM zone or an EPSG code. There is a setting in the Application Settings dialog that lets you save a default UTM Zone to be used for bitmaps.

GeoTIFF (recommended)

GeoTIFF is a specific type of TIFF bitmap file that has both the georeferencing parameters and the coordinate reference system/datum embedded directly in the file - everything a World File plus a manually-entered UTM zone or EPSG code would otherwise provide. This means no separate World File is needed, and there's no CRS to look up or enter: Condes automatically detects the georeferencing data in the file and uses it.

Because a GeoTIFF is self-contained, it's the preferred format over a bitmap with a World File - there's no risk of a missing or mismatched World File, and no manual CRS entry to get wrong.

In the Course Layout Editor, the world coordinates for the mouse pointer is shown in the status bar below the map pane, when the map is georeferenced.

 

When exporting, Condes puts the World Ccoordinates, and/or the Latitude/Longitude, for each control into the file:

IOF XML files.  If the latitude and longitude are available, then these are used.

Bitmap files.   A world file with the same name, and appropriate extension, is created.  The world file contains the world coordinates for the top left corner of the map.  The map file's world coordinate system is used.  If the format is Tiff, GeoTiff information is included in the exported file.

SVG files.  If the latitude and longitude are available, then these are used.

KMZ, KML and GPX files.  Latitude and longitude must be available.  This means that the reference coordinate system must be defined.

PDF files.  When a coordinate reference system is available, and Condes can translate coordinates to latitude and longitude, Condes will geo-reference maps in the file, according to the "Geospatial PDF" specification.  See Geospatial PDF files.

In order for Condes to provide georeferencing data in the exported file, the map must be georeferenced.  In order to provide longitude and latitude, the real world reference coordinate system need to be defined.