Settings for this event
|
<< Click to Display Table of Contents >> Navigation: Dialogs and Views > File configuration dialogs > Settings for this event |
These pages allow you to change settings that are specific to the current event file. This section has the following pages:
The settings on this page are specific to this event file.
Event Name
The name of the event. This text appears in the heading of the control descriptions, and on other printouts.
Event Date
The date of the event. This is optional - check the box to enable this field. The date with the event name in the control descriptions and other printouts.
Event Discipline
Select Foot Orienteering, Mountain Bike Orienteering, Ski Orienteering or Trail Orienteering.
This setting controls the default course symbol settings and the default course type when creating a new course. Refer to Event Disciplines for more detail.
Default settings for this event
First control code
When Condes suggests a control code for a new control, it does not suggest numbers lower than this.
Show the event file name under control descriptions
Check this box to add the event file name to the information shown under control descriptions (both when printed on the map and when printed separately).
You can use this as a way to keep track of different versions of the courses; for example if you add the date or a sequential version number to the file name.
Note: This setting applies for printing via the Printout menu, and exports via the Export menu. It does not apply for the Course Layout Editor - the file name is always shown in the CLE and when printing directly from the CLE.
Draw dot in control circle
When this option is checked, a dot is drawn at the center of control circles. The setting can be overridden for each individual course.
Show control number for map exchange control on course part 2 and following parts
Check this box to show the control number next to a map exchange control when the map exchange control appears on part 2 (and following parts) of the course.
Use this page to set the appearance of loose control descriptions. Use the menu Printout / Loose control descriptions (Print Loose Control Descriptions dialog) to print loose control descriptions.
Size
This is the side length of the fields in the control description.
Appearance
Select whether the control description should be symbolic or textual. "The relevant class or course decides" means that the setting on the class or course that is shown in the control description decides whether it is symbolic or textual.
Check the "Background should be transparent" box to remove the white "screen" behind the control description
Check the "Show relay variation" box to show a line above the control description which states the relay variation code for the relay course.
Column Alignment
Use this to set which corner the control description (printed on the map) aligns to. The alignment can be left or right, and top or bottom.
Example: When aligning at the left, top corner, this corner is fixed, and the control description then "flows" down and to the right.
Score O
These settings apply for score O courses only
Show in column A
Select what a control description for a score O course should display in column A, either the Points value, the Control number, or Blank.
Show in column B
Select what a control description for a score O course should display in column B, either the Points value, the Control code, or Blank.
Sort order
Select whether a control description for a score O course should be sorted according to the contents of column A or column B.
Spacing
This is the spacing between control descriptions when printing loose control descriptions.
Use this page to set the page layout parameters. These parameters are the standard parameters for the event, used in the print maps and courses, and the export PDF features.
Page margins and overlap
Page margin
This setting is the width of the margin along the edges of the page that is left empty.
Overlap
This setting is the width of the map overlap from one page to the next, used when a printout of a map spans multiple pages.
Spacing between courses
This setting is the width of the spacing between multiple maps printed on the same page.
This page allows you to setup the layout of the control card for this event. The layout settings are used when printing master control cards for punch checking.
Card Type
is used to set whether conventional punches or Emit electronic punches are used. This setting controls what kind of master control cards Condes produce.
Layout
Applicable only for conventional control cards. Can be User Defined (click on "Details..." to configure) or Danish Standard / Danish Large.